BTWCP - P7002-1037 BUFF PLASTISOL
- MSDS: BTWCP
- Manufacturer: QCM COMPANY
- Product Name: P7002-1037 BUFF PLASTISOL
- National Stock Number: 8030-01-041-1598
Product Identification
Product ID:P7002-1037 BUFF PLASTISOL
MSDS Date:05/20/1994
FSC:8030
NIIN:01-041-1598
Kit Part:Y
MSDS Number: BTWCP
Responsible Party
KENT, WA 98032
US
Emergency Phone: 206-859-0933/800-424-9300 CHEMTREC
Info Phone: 206-859-0933
Preparer: ROY WHEELDON
Cage: 8L872
Contractor
Telephone: 253-859-0933, FAX 253-859-0935
Cage: 8L872
Ingredients
VINYL CHLORIDE MONOMER (SARA III)
CAS: 75-01-4
RTECS: KU9625000
Fraction By Weight: <0.003%
OSHA PEL 1 PPM
ACGIH TLV: 5 PPM
EPA Report Quantity: 1 LB
DOT Report Quantity: 1 LB
PHTHALATE PLASTICIZER (NOT HAZARDOUS)
EPOXIDIZED SOYBEAN OIL (NOT HAZARDOUS)
PVC RESIN (NOT HAZARDOUS)
BARIUM CARBOXYLATE STABILIZER
Fraction By Weight: 0.5%
ACGIH TLV: 0.05 MG/M3 (CADMIUM)
CADMIUM CARBOXYLATE STABILIZER
Fraction By Weight: 0.1%
OSHA PEL 0.2 MG/M3 (CADMIUM)
ORGANIC PIGMENT (NOT HAZARDOUS)
Hazards
Reports of Carcinogenicity:NTP:UNKNOWN IARC:YES
Health Hazards Acute and Chronic:EYE CONTACT: MAY CAUSE IRRITATION.
SKIN CONTACT: CAN CAUSE SLIGHT IRRITATION. INHALATION: SHOULD BE
VENTILATED IF HEAT PROCESSED. INGESTION: CAN CAUSE GASTROINTESTINAL
IRRITATION, NAUSEA, VOMITING, AN D DIARRHEA.
Explanation of Carcinogenicity:CADMIUM COMPOUND LISTED IARC SUSPECTED
CARCINOGEN;NO SPECIFIC INFO ON CADMIUM STABILIZER THAT WOULD PUT
THEM IN CATAGORY
First Aid
First Aid:EYE CONTACT: FLUSH WITH WATER FOR 15 MINUTES. SKIN CONTACT:
WASH WITH SOAP AND WATER. INHALATION: IF EXCESSIVE INHALATION,
REMOVE TO FRESH AIR. INGESTION: CONSULT A PHYSICIAN.
Fire Fighting
Flash Point:>350F,>177C
Extinguishing Media:DRY CHEMICAL, REGULAR FOAM, OR WATER FOG.
Fire Fighting Procedures:WEAR SELF-CONTAINED BREATHING APPARATUS IF
IGNITED.
Unusual Fire/Explosion Hazard:TOXIC GASES CAN FORM - CARBON DIOXIDE,
CARBON MONOXIDE, AND VARIOUS HYDROCARBONS.
Accidental Release
Spill Release Procedures:SMALL SPILLS: ABSORB ON VERMICULITE OR FLOOR
DRY. LARGE SPILLS: PUMP TO SALVAGE TANK.
Handling
Handling and Storage Precautions:CONTAINERS MAY BE HAZARDOUS WHEN
EMPTIED DUE TO VAPOR BUILD-UP. STORE BETWEEN 50 F AND 90 F, AWAY
FROM HEAT OR FLAME.
Other Precautions:ALL HAZARD PRECAUTIONS IN THE DATA SHEET MUST BE
OBSERVED. THIS PRODUCT CONTAINS A SECTION 313 CHEMICAL SUBJECT TO
THE REPORTING REQUIREMENTS OF TITLE III OR SARA AND 40 CFR PART
372.
Exposure Controls
Respiratory Protection:RECOMMENDED IF LOCAL EXHAUST. NIOSH APPROVED.
Ventilation:LOCAL EXHAUST: RECOMMENDED FOR HEAT PROCESSING. MECHANICAL
(GENERAL) RECOMMENDED.
Protective Gloves:POLYETHEYLENE TYPE
Eye Protection:SAFETY GLASSES
Other Protective Equipment:OTHER PROTECTIVE EQUIPMENT AND PRECAUTIONS:
WASH WITH SOAP AND WATER IF CONTACT WITH SKIN.
Work Hygienic Practices:GOOD INDUSTRIAL HYGIENE. WASH CONTAMINATED
CLOTHING BEFORE REUSE.
Supplemental Safety and Health
Chemical Properties
Spec Gravity:1:1 (WATER=1)
Solubility in Water:NEGLIGIBLE
Appearance and Odor:BUFF COLORED LIQUID - VISCOUS
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS
Stability Condition to Avoid:HIGH TEMPERATURES
Hazardous Decomposition Products:CARBON MONOXIDE, CARBON DIOXIDE,
VARIOUS HYDROCARBONS, HYDROGEN CHLORIDE.
Disposal
Waste Disposal Methods:INCINERATE ACCORDING TO LOCAL AND FEDERAL
STANDARDS. LIQUID FORM IS HAZARDOUS. SOLID IS NOT. LIQUID HAZARD
WASTE CODES: D005, D006.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.